IBM 000-611 study guide

If you are still hesitate to choose our ITCertKing, you can try to free download part of IBM 000-611 exam certification exam questions and answers provided in our ITCertKing. So that you can know the high reliability of our ITCertKing. Our ITCertKing will be your best selection and guarantee to pass IBM 000-611 exam certification. Your choose of our ITCertKing is equal to choose success.

Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the IBM 000-611 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose ITCertKing's IBM 000-611 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select ITCertKing's IBM 000-611 exam training materials, and it is absolutely trustworthy.

If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the IBM 000-611 exam. You can use ITCertKing's IBM 000-611 exam training materials. The training materials of ITCertKing are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.

ITCertKing IBM 000-611 exam information are cheap and fine. We use simulation questions and answers dedication to our candidates with ultra-low price and high quality . We sincerely hope that you can pass the exam. We provide you with a convenient online service to resolve any questions about IBM 000-611 exam questions for you.

Exam Code: 000-611
Exam Name: IBM (DB2 10.1 DBA for Linux, UNIX, and Windows)
One year free update, No help, Full refund!
Total Q&A: 118 Questions and Answers
Last Update: 2013-12-03

ITCertKing can not only save you valuable time, but also make you feel at ease to participate in the exam and pass it successfully. ITCertKing has good reliability and a high reputation in the IT professionals. You can free download the part of IBM 000-611 exam questions and answers ITCertKing provide as an attempt to determine the reliability of our products. I believe you will be very satisfied of our products. I have confidence in our ITCertKing products that soon ITCertKing's exam questions and answers about IBM 000-611 will be your choice and you will pass IBM certification 000-611 exam successfully. It is wise to choose our ITCertKing and ITCertKing will prove to be the most satisfied product you want.

ITCertKing IBM 000-611 exam training materials can help you to come true your dreams. Because it contains all the questions of IBM 000-611 examination. With ITCertKing, you could throw yourself into the exam preparation completely. With high quality training materials by ITCertKing provided, you will certainly pass the exam. ITCertKing can give you a brighter future.

ITCertKing provide a good after-sales service for all customers. If you choose to purchase ITCertKing products, ITCertKing will provide you with online service for 24 hours a day and one year free update service, which timely inform you the latest exam information to let you have a fully preparation. We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of ITCertKing to help you pass your first time IBM certification 000-611 exam is very cost-effective.

000-611 Free Demo Download: http://www.itcertking.com/000-611_exam.html

NO.1 Which command can be used to restore a corrupted database using only the recovery history file?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE DATABASE
D. ROLLFORWARD DATABASE
Answer: B

IBM dumps   000-611   000-611 demo   000-611

NO.2 What are two types of security label components that can be used with Label-Based Access Control
(LBAC)? (Choose two).
A. Set
B. Tree
C. Group
D. Range
E. Hierarchy
Answer: A,B

IBM test questions   000-611 test   000-611   000-611 study guide   000-611 exam prep

NO.3 If a single node database is actively being used by applications when a power failure occurs, what
method is used to bring the database back to a consistent state once power has been restored.?
A. Crash recovery
B. Version recovery
C. Disaster recovery
D. Roll-forward recovery
Answer: A

IBM dumps   000-611   000-611   000-611   000-611

NO.4 Which command will define the alternate diagnostic data directory path as /db2data/db2dump2?
A. db2set ALT_DIAGPATH=/db2data/db2dump2
B. db2set SECONDARY_DIAGPATH=/db2data/db2dump2
C. UPDATE DBM CFG USING ALT_DIAGPATH /db2data/db2dump2
D. UPDATE DBM CFG USING SECONDARY_DIAGPATH /db2data/db2dump2
Answer: C

IBM dumps   000-611   000-611 practice test   000-611

NO.5 You have an High Availability and Disaster Recovery (HADR) environment set up and you want to read
from the standby database. What must you do?
A. Assign the value ON to the DB2_HADR_ROS registry variable.
B. Assign the value ON to the DB2_HADR_SNAP registry variable.
C. Execute the STOP HADR command to temporarily break the HADR connection to the standby.
D. Execute the TAKEOVER HADR command to instruct the standby database to takeover as the new
primary database.
Answer: A

IBM   000-611   000-611   000-611

NO.6 The values of the automatic maintenance database configuration parameters for a database named
SAMPLE are as follows:
What commands must be run to enable real-time statistics collection on the SAMPLE database?
A. UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample
USING AUTO_STMT_STATS ON;
B. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STMT_STATS ON;
C. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STATS_VIEWS ON; D.
UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING
AUTO_STATS_VIEWS ON;
Answer: B

IBM   000-611   000-611   000-611 exam simulations

NO.7 Due to a hardware failure, it appears that there may be some corruption in database DB_1 as DB2 is
reporting a "bad page". DB2DART is performed for the entire database and it appears that several bad
pages were detected in table space TBSP_1.
What command can be used to recover the database and repair the corruption in table space TBSP_1?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE TABLESPACE
D. ROLLFORWARD DATABASE
Answer: B

IBM   000-611 pdf   000-611 test answers   000-611 exam dumps   000-611

NO.8 What is the correct procedure for recovering a dropped table when DROPPED TABLE RECOVERY has
been enabled and the database must remain online?
A. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
database and recover the droppedtable.
B. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
appropriate table space and recover thedropped table.
C. Restore the database from a backup image that was taken before the table was dropped; run the
ROLLFORWARD DATABASE command withthe RECOVER DROPPED TABLE option to restore the
database and recover the dropped table.
D. Restore the appropriate table space from a backup image that was taken before the table was dropped;
run the ROLLFORWARD DATABASEcommand with the RECOVER DROPPED TABLE option to restore
the appropriate table space and recover the dropped table.
Answer: D

IBM test answers   000-611 test answers   000-611   000-611   000-611   000-611

NO.9 In IBM Data Studio, where can you schedule script-based jobs?
A. Job Console
B. Job Manager
C. Task Manager
D. Utilities Console
Answer: B

IBM exam   000-611 answers real questions   000-611

NO.10 What is the MAX_LOG database configuration parameter used for?
A. To limit how many log files a single transaction can span.
B. To limit the percentage of primary log space a running transaction can consume.
C. To limit the total number of primary and secondary log files a database can consume.
D. To limit the total number of secondary log files a transaction can consume before infinite logging is
enabled.
Answer: B

IBM   000-611 exam prep   000-611 exam dumps   000-611

NO.11 What unit of measurement is used to represent the cumulative total cost of a node in a Visual Explain
access plan diagram?
A. CPU cycles
B. Elapsed time, in milliseconds
C. Processing instructions performed
D. Timerons
Answer: D

IBM   000-611   000-611   000-611 dumps   000-611   000-611

NO.12 If the current value for self-tuning memory is: Self Tuning Memory (SELF_TUNING_MEM) = ON
(Inactive) Which statement is true?
A. Self-tuning is occurring only on the instance memory area.
B. The memory tuner is actively tuning the memory on the system.
C. Self-tuning is not occurring because it is waiting for the database to be recycled.
D. Self-tuning is not occurring because there are less than two memory consumers enabled.
Answer: D

IBM   000-611 test answers   000-611   000-611 exam prep   000-611 original questions

NO.13 A table named SALES was created as follows:
If management wants to use Label-Based Access Control (LBAC) to protect individual rows in the SALES
table, and the security policy needed (SEC_POLICY) has already been created, what must be done to
protect the table as desired?
A. Associate the SEC_POLICY security policy with the SALES table.
B. Add a column with the DB2SECURITYLABEL data type to the SALES table.
C. Add a column with the DB2SECURITYLABEL data type to the SALES table and then associate the
SEC_POLICY security policy with the table.
D. Add a SECURED WITH clause to every column in the SALES table and then associate the
SEC_POLICY security policy with the SALES table.
Answer: C

IBM   000-611   000-611 practice test   000-611 original questions   000-611

NO.14 Where are column mask definitions stored?
A. In the table definition
B. In the system catalog
C. In the table space metadata
D. In the database configuration file
Answer: B

IBM test questions   000-611   000-611   000-611   000-611 exam

NO.15 Which statement is correct when describing trusted contexts?
A. A trusted context defines a trust relationship for a connection between the database and an external
entity.
B. A trusted context promotes the authorization level of the connection initiator and grants them DBADM
authority.
C. A trusted context defines a trust relationship between a user and a table allowing that user additional
capabilities.
D. A trusted context gives the database connection the ability to bypass auditing since authentication has
already occurred.
Answer: A

IBM   000-611 certification   000-611 exam dumps   000-611 original questions

ITCertKing offer the latest VCAC510 exam material and high-quality 70-483 pdf questions & answers. Our BAS-004 VCE testing engine and MB7-701 study guide can help you pass the real exam. High-quality HP2-E59 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/000-611_exam.html